Monitor Audio IA150-8C Stereo Amplifier

The Monitor Audio Installation Amplifiers are configurable to 1, 2, 3, 4, 5, 6, or 12 channels. The IA150-8C enables up to eight (four stereo pairs) channels of 150 watts of power at four ohms. It’ll fit 1U rack height and, as a member of the Monitor Audio ‘Connect’ division, it employs our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network..

The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. Perfectly prepared for any project, the IA150-8C’s industry standard removable block connectors accept up to 12-gauge (3.5 mm2) cable.

Together with the rest of the Installation Amplifier range, the IA150-8C provides the brain as well as the brawn for the mightiest of projects.

• 'Connect' IP Control - Yes
• Channel Number - 8 (4 Stereo Pairs)
• Power (W / Channel) | 4 ohms - 150 W
• Power (W / Channel) | 8 ohms - 140 W
• Power (W / Channel) | Bridge (8 ohms) - 300 W (4CH)
• Power (W / Channel) | 70V - N/A
• Input Impedance - 20 K ohms
• Output Impedance (Loop RCA) - 600 ohms
• Input Sensitivity - 100 mV / 1 W, 1140 mV – Full power
• Maximum Input Voltage - 2.9 V
• Signal to Noise (SN:R) - -100 dB (20 Hz – 20 kHz)
• Frequency Response - 5 Hz – 50 kHz
• Total Harmonic Distortion THD + N@1 KHz - 0.03%
• Rack Height - 1U
• Dimensions (Excluding Feet (H x W x D)) - 42.4 x 438 x 427 mm (111/16 x 171/4 x 1613/16")
• Dimensions (Including Feet (H x W x D)) - 52.8 x 438 x 427 mm (21/16 x 171/4 x 1613/16")
• Width (including rack brackets) - 482 mm (19")
• IP Communication - TCP/IP (RJ-45 10/100 Base T)
• Mains Operating Voltage:

- 100 –120 V @ 60 Hz

- 220 – 240 V @ 50 Hz

• Fuse Rating - 10 A (T10AL ~ 250VAC)
• Standby Power Consumption - <0.5 W (green mode)
• Networked Standby Power Consumption - <2 W
• Weight - 7.45 kg (16 lb 6 oz)
• Sold As - Single Unit

• 1 x Monitor Audio IA150-8C Amplifier
• 1 x Cut Out Template
• 1 x User Guide