K2 Audio Bluetooth Ceiling Speaker System - 6.5”
£289.99
Regular Price
Model:
KLABXJ+QI65CB
Shop All K2 Audio
Find More
In Ceiling Speaker Systems
AMPLIFIER
- Bluetooth Audio Modes: A2DP Codecs: SBC, MPEG1,2 audio / mpeg2,4 AAC /ATRAC /APTX
- Power output (15v 45W supply): 22W RMS per channel into 4ohms
- Power output (12v 45W supply): 18W RMS per channel into 4ohms
- Power output (18v 54W supply): 25W RMS per channel into 4ohms
- Total Harmonic Distortion + Noise: 0.15% (4ohm load, 1KHz, 8W power)
- Bandwidth: 20Hz to 22KHz Passive limitation built in
- Power Supply: 12V to 18V (absolute max 18V DC) minimum current 3.0A. Connection via a 2.1mm DC connector centre positive, auto mute on under voltage.
- Fuse: self resetting 3A built in to clear remove power for at least 20 seconds, clear fault and reconnect
- Amplifier topology: full bridge mode all speaker connections are live ( no common ground connection)
- Recommended min speaker impedance: 4 ohms per channel
- Absolute minimum speaker impedance: 3 ohms per channel
- SNR: 98dB
- Voltage gain: 33dB
- Input required to produce full output: approx 775mV
- Standby current: 20mA (0.3W at 15v supply)
- Loudspeaker wire size: solid min 0.14mm2 max 2.5mm2, stranded min 0.14mm2 max 1.5mm2
SPEAKERS (STANDARD)
Brand = Q Acoustics
Model = QI65CB
- Woofer diameter: 6.5"
- Power handling (program): 50W
- Impedance (nominal) ohms: 8ohm
- Sensitivity dB spl (2.83V, 1m): 93
- Response(Low freq.) -3dB Hz: 77 - 20,000
- Maximum rear depth: 79mm
- Size(Round grilles): 232mm dia
- Warranty: 5 Years
SPEAKERS (HIGH DEFINITION)
Brand = Q Acoustics
Model = QI65C
- Tweeter: Swivel
- Tweeter diameter: 0.75" (19mm)
- Woofer diameter: 6.5"
- Power handling (program): 15-60W
- Impedance (nominal) ohms: 8ohm
- Sensitivity dB spl (2.83V, 1m): 89
- Response(Low freq.) -3dB Hz: 75
- Maximum rear depth: 79mm
- Size(Round grilles): 232mm dia
- Warranty: 5 Years